CoreEP4CE10 FPGA Altera Cyclone IV

Overview

CoreEP4CE10 is an FPGA core board that features an EP4CE10F17C8N device onboard, supports further expansion.

• • onboard Serial Configuration Device EPCS16SI8N
  • integrated FPGA basic circuit, such as clock circuit
  • onboard nCONFIG button, RESET button, 4 x LEDs
  • all the I/O ports are accessible on the pin headers
  • onboard JTAG debugging/programming interface
  • 2.00mm header pitch design, suitable for being plugged-in your application system

What's On Board

1. 1. EP4CE10F17C8N:the ALTERA Cyclone IV FPGA device which features:
      • Operating Frequency: 50MHz
      • Operating Voltage: 1.15V～3.465V
      • Package: BGA256
      • I/Os: 164
      • LEs: 10K
      • RAM: 414kb
      • PLLs: 2
      • Debugging/Programming: supports JTAG
   2. AMS1117-3.3 (on bottom side), 3.3V voltage regulator
   3. AMS1117-2.5 (on bottom side), 2.5V voltage regulator
   4. AMS1117-1.2 (on bottom side), 1.2V voltage regulator
   5. EPCS16, onboard serial FLASH memory, for storing code
   6. Power indicator
   7. LEDs
   8. Reset button
   9. nCONFIG button: for re-configuring the FPGA chip, the equivalent of power reseting
   10. 50M active crystal
   11. JTAG interface: for debugging/programming
   12. FPGA pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion

Photos

Note:
CoreEP4CE10 provides JTAG debugging interface, yet does NOT integrate any debugging function, a debugger is required.
Mother board and programmer/debugger in the photos are NOT included in the price.

JTAG Interface

The figure below shows the header pinout of JTAG

Figure 1. JTAG Header Pinout

Development Resources

• • Related software (Quaters II, NIOS II etc.)
  • Demo code (Verilog, VHDL, NIOS II C)
  • Schematic (PDF)
  • FPGA development documentations

TÀI LIỆU THAM KHẢO

Wiki: www.waveshare.com/wiki/CoreEP4CE10

MLAB: liên hệ sđt(zalo): 086.262.8846 để được tư vấn, hỗ trợ trực tiếp