Measuring Range: 0-5m

The shell of the pressure level sensor is made of stainless steel, anti-corrosion, and easy to clean. It can be directly placed in a liquid like water, oil, or even mash with large viscosity. This product can provide a steady performance in all sorts of measurement conditions such as rivers, reservoirs, city water supply, and groundwater in urban, and basins.

IP68

We sold this product together with our Gravity: Analog Current to Voltage Converter. The converter can convert current into a voltage signal which can be read by your Arduino controllers or other controllers. The stainless steel submersible pressure level sensor can be used in waterworks, refineries, sewage disposal work, construction, light industry, mechanical, and so on.

NOTE:

1. Please connect the power supply exactly as per the connection instruction.

2. The product is a precision device, so it is not allowed to disassemble and crash the device or make it fall from a high place, what’s more, don’t touch its diaphragm with any sharp objects in case of causing device damage.

3. Power the submersible pressure level sensor up then you can use it. But it can provide more steady output after preheating for 30 minutes. Please turn off the power and stop using it if any abnormality is found during use.

4. The liquid level lead should be vertically downward. Please prevent water from entering the terminal, and the joint is required to be waterproof.

5. Place the liquid-level probe in water, try to fix it, and keep it away from the inlet.

 Connection Diagram

                                               Dimension Diagram                                                         

+ Cable Length: 5m

+ Measuring Range: 0-5m

+ Accuracy: 0.5%

+ Output Signal: 4-20mA

+ Operating Voltage: 12-36V

+ Operating Temperature: -20℃-70℃

+ Overload Capacity: 300%

+ Service Life: 1*10^8 Pressure Circulation (25℃)

+ Material: 316L stainless steel

+ Protection Class: IP68

⇒ Product Wiki

⇒ Selection Guide