Hỗ trợ mua hàng : 02436.231.170 or 0984.058.846

Tư vấn kỹ thuật Raspberry Pi và RS232/RS485 to Ethernet : 0862.628.846

Tư vấn kỹ thuật Module khác : 0866.828.846 or 0862.998.846

VUI LÒNG LIÊN HỆ ĐỂ ĐƯỢC HỖ TRỢ KỸ THUẬT  VÀ ĐẶT HÀNG TRỰC TIẾP  

GIẤY XÁC NHẬN MLAB LÀ ĐƠN VỊ PHÂN PHỐI CHÍNH THỨC (OFFICAL DISTRIBUTOR) CỦA WAVESHARE TẠI VIỆT NAM

Dual Gigabit Ethernet Base Board For RPI CM4

Mini, Practical, And Neat

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Optional Black Metal Case

Better Protection For The Base Board, Comes With a Cooling Fan For Efficient Heat Dissipation

Specifications

CM4 SOCKET	Suitable for all variants of Compute Module 4
NETWORKING	Dual Gigabit Ethernet RJ45 connector
USB	USB 2.0 Port
PIN HEADER	Raspberry Pi 40PIN GPIO header
STORAGE	TF card socket for Compute Module 4 Lite (without eMMC) variants
FAN HEADER	4-wire SH1.0 port, allows speed adjustment and measurement, 5V
POWER INPUT	5V, Type-C interface
DIMENSIONS	55.0 × 68.0mm

Connecting With Compute Module 4

Standard CM4 Socket And 40PIN GPIO Header

Suitable For Compute Module 4 Lite/EMMC Series Module

*** for reference only, CM4 is NOT included.

Rich Interfaces

 

Precise Cut-Out With Clear Label

Each Cut-Out Is Completely Aligned With The Connector

Magnetic Design

Magnetic Removable Top With The Location Columns, Easy To Fix And

Better Protection For The GPIO Pins

 

Heat Dissipation Design

Metal Case For Large Area Thermal Conductivity And Heat Dissipation

Built-In Speed-Adjustable Fan With Cooling Fins, More Efficient

 

CÁC ỨNG DỤNG 

Suitable For Raspberry Pi Or Other Industrial Occasions With Special Function Requirements

HƯỚNG DẪN LẮP ĐẶT THIẾT BỊ

CHI TIẾT TRÊN BOARD MẠCH

1. 40PIN GPIO header
   for connecting sorts of HAT
2. CM4 Socket
   suitable for all variants of Compute Module 4
3. RJ45 Dual Gigabit Ethernet Port
   Dual RJ45 Gigabit Ethernet ports, 10/100/1000M compatible
   ETHERNET 0: CM4 original network port
   ETHERNET 1: PCIe extended network port
4. USB 2.0 Type-A port
   for connecting sorts of USB devices
5. FAN header
   for connecting the cooling fan, allows speed adjustment and measurement
6. Reset button
7. Boot switch
   ON: CM4 would be booted from the USB-C interface
   OFF: CM4 would be booted from eMMC or TF car

8. Type-C port
   5V/2.5A power supply, or used for eMMC programming
9. TF card slot
   for connecting a TF card with a pre-burnt image (Lite variant ONLY)
10. RTL8111H
    Gigabit NIC chip
11. Indicator
    PWR: indicating the power supply status of Raspberry Pi
    SYS: indicating the working status of Raspberry Pi
12. SYSTEM switch
    EEPROM_WP: Prevent EEPROM from being overwritten
    WiFi_DIS: WiFi disabled, only for CM4 version with wireless
    BT_DIS: Bluetooth disabled, only for CM4 version with wireless

HÌNH ẢNH SẢN PHẨM

 

KÍCH THƯỚC BÊN NGOÀI 

 

TÀI LIỆU THAM KHẢO

WIKI: www.waveshare.com/wiki/CM4-DUAL-ETH-MINI