CÔNG TY TNHH MLAB
  • Tìm kiếm nhiều:
  • AI Computer
  • Raspberry Pi
  • NVIDIA Jetson
  • Máy tính nhúng
  • Màn hình LCD ....

Danh mục

    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor
    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor

    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor


    The BMI160 6-axis inertial motion sensor features a 3-axis accelerometer and gyroscope, supports wide voltage, and is compatible with Arduino, ideal for fitness tracking.

    Sản phẩm được nhập khẩu chính hãng từ DFRobot

    Hỗ trợ kỹ thuật trong quá trình sử dụng

    Xuất hóa đơn VAT cho cá nhân, đơn vị có nhu cầu

    Sản phẩm được bảo hành 3 tháng.


    Thông tin sản phẩm

    Gravity: I2C BMI160 6-Axis Inertial Motion Sensor

    Introduction

    The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 is designed for smartphones, tablets, wearable devices. It has built-in intelligent step-counting algorithms that can be read directly through registers. Built-in 3-axis acceleration and 3-axis gyroscope can detect running, fitness and other motion. Built-in LDO power management chip, supports 3.2~6V wide voltage power supply, and also has I2C level conversion circuit, compatible with Arduino 3.3V and 5V micro controller.

    Features

    • Step Count
    • Acceleration Detection
    • Inclination Measurement
    • Display Toggle Horizontal / Vertical Mode

    Specification

    • Operating Voltage: 3.2V~6V
    • Current Consumption: <1mA
    • Interface: Gravity-I2C
    • Acceleration Range: ±2g/±4g/±8g/±16g
    • Gyroscopes Range: ±125°/s,±250°/s,±500°/s,±1000°/s,±2000°/s
    • Acceleration Zero-g Offset: ±40mg
    • Gyroscopes Zero-g Offset: ±10°/s
    • Programmable Frequency: 25/32Hz~1600Hz
    • 6D Detection and Location
    • 16-bit Data Output
    • Shock Resistance: 1000gx 200us
    • 2 Independent Programmable Interrupt Generators
    • In-built 1024 Byte FIFO
    • Working Temperature:-40℃~+85℃
    • Dimension: 22X27mm/0.87x1.06 in

    Shipping List

    • Gravity: I2C BMI160 6-axis IMU x1
    • Gravity I2C/UART sensor cable x1
    • XH2.54 Single Row Pin Header-4P x1

    Documents

    Khách hàng đánh giá
    5.0
    5
    0%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    Chia sẻ nhận xét về sản phẩm

    Đánh giá và nhận xét

    Gửi nhận xét của bạn

        Bình luận
        Gửi bình luận
        Bình luận

          Sản phẩm liên quan